This project involved the addition of a bedroom and a bathroom. The garage floor was elevated to the same level of the main floor. This allowed electrical conduits and plumbing to be moved without affecting the main level. The foyer was matched with hardwood floors in the interior of the new room. Framing, drywall and windows were also completed. The results were a stunning new space for a busy Miami family.
FAQ
Can I remodel my whole house by myself?
Do it yourself - you'll save time and money.
It doesn’t matter how much DIY is your passion, sometimes it can be difficult to do the job yourself. It may be impossible to control the many variables.
An example: If your house is older than you think, it might be that the wiring is unsafe. You will need an electrician to inspect and make sure that your system is reliable and safe.
You also need to consider the fact that you might not be able to handle any kind of structural damage that might occur during the renovation process.
You may not have the proper tools to complete the job. You will need a special tool called the plumber's snake to clean clogged pipes if you plan to install a kitchen sink.
There are also plumbing codes that require you to have a licensed plumber working on your project.
You must be confident in your abilities before you attempt such a difficult task.
If you are unsure if it is possible to do the job on your own, ask friends or family members who have worked on similar projects.
They can offer advice about what to do and where to go for more information.
Is it better for a contractor to hire or a subcontractor to do the job?
Hiring a general contract is typically more costly than hiring subcontractors. General contractors have many employees so often charge their clients a high amount for labor costs. Subcontractors, on the contrary, hire one employee and charge less per hour.
How can you avoid being ripped off during renovations to your house?
To avoid being scammed, it is essential to fully understand the terms of your contract. Before signing any contract, read through the fine print carefully. Also, don't sign blank contracts. Always request copies of signed contracts.
Statistics
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
External Links
How To
How do I plan for a whole house renovation?
Planning a whole house remodel requires careful planning and research. There are many things you should consider before starting your project. The first thing you need to decide is what kind of home improvement you want to make. There are many options available, including kitchen, bathroom and bedroom. Once you have decided which category you wish to work in, you will need to determine how much money you have to spend on your project. If you don't have experience with working on houses, it's best to budget at minimum $5,000 per room. If you have some experience, then you might be able to get away with less than this amount.
Once you know how much money your budget allows you to spend, then you will need to decide how big a job it is you are willing to take on. If your budget only allows for a small renovation of your kitchen, you will be unable to paint the walls, replace the flooring or install countertops. On the other side, if your budget allows for a full renovation of your kitchen, you'll be able do just about any task.
Next, find a contractor that specializes in the project you are interested in. This will ensure you get quality results and save you a lot of hassle later. You should begin gathering materials and supplies after you've found a competent contractor. Depending on the size of your project, you may need to buy everything from scratch. You shouldn't have any trouble finding the right item in pre-made stores.
Once you've gathered the supplies needed, it's now time to start planning. Begin by sketching out a rough plan of where furniture and appliances will be placed. Next, plan the layout. Be sure to leave enough room for electric outlets and plumbing. Make sure to position the most visited areas close to the front door. Visitors can also easily access them. You can finish your design by choosing colors and finishes. Keep your designs simple and in neutral tones to save money.
Now it's time to build! Before you start building, check your local codes. Some cities require permits. Other cities allow homeowners without permits. To begin construction you will first need to take down all walls and floors. To protect your flooring, you will lay plywood sheets. Next, nail or screw pieces of wood together to form the frame that will house your cabinets. You will attach doors or windows to the frame.
There are some final touches that you will need to make after you are done. For example, you'll probably want to cover exposed pipes and wires. To do this, you'll use plastic sheeting and tape. Also, you will need to hang mirrors or pictures. Just remember to keep your work area clean and tidy at all times.
These steps will ensure that you have a beautiful and functional home, which will save you tons of money. Now that you know how to plan a whole house remodeling project, you can go ahead and get started!